Threater Portal Release Notes

Build 167 - June 14, 2024

Threater Enforce Configuration Now in Portal!

—------------------------------------------

PREREQUISITE : Update Enforcer to BUILD 247

After your Enforcer is successfully updated to the new build, we strongly recommend you log out and log back into the Threater portal to minimize browser caching effects.

—------------------------------------------

Threater Enforce configurations can now be managed directly in the Threater portal! To do so, follow the steps below: 

• Navigate to Enforce in the left-hand navigation menu
• Click on the Enforcers tab
• Click on the hyperlinked name of the applicable Enforcer (MUST BE ON BUILD 247)
• Expand the Configuration card to make configuration updates on this Enforcer

As part of the Build 247 installation, the Enforcer’s current configurations will be copied over to the Threater portal. Configurations for Enforcers on Build 247 or greater will now be managed in the portal and will be read-only on the Threater Enforce user interface (UI). The table below outlines the Enforce Configurations available in the portal and where those configurations were previously set in the Enforce UI:

Configurations not listed above will remain in the Enforce UI and will need to be set there.

When making configuration updates, you can do so on as many of the configuration tabs as desired and save once when complete, or you can choose to save on each individual tab. 

If you make an update without saving and attempt to navigate away, you will receive an alert letting you know that you have unsaved changes.